Accel Graphic Systems

Ackerman Enterprises is an authorized dealer for Accel Graphic Systems aka Pamarco Global Graphics offering Crestline, Tempest, Powerpro, Waterboy, Faststack, and Spraypowder products. As an example, we are able to provide service and product replacement options for following Pamarco products:

  • Offset – PowerderPro® Spraying System (link)
    • The PowderPro Spraying System uses suction instead of forced air to evenly raise powder to a consistent level in the jar, resulting in a consistent air/powder ratio delivered to the sheet.
      Offset – PowerderPro® Spraying System

      Offset – PowerderPro® Spraying System


      The PowderPro features independent distribution lines for each spray head, outer spray heads which can be turned off when printing narrow sheets, and an automatic powder-level compensation system. Available for A.B. Dick: 9985, 9995, Hamada: 234, 234A, Heidelberg: Quickmaster, Itek: 960, 975, 985, 3985, and Ryobi: 2800, 3200, 3200MCD, 3302M and 3302H, 3304H.
  • Offset – Crestline® Altra Series Dampner (link)
    • The Crestline Altra Series Dampner is an instant ink and water balance solution.
      It runs without alcohol providing a thinner film of moisture to the plate.  Paper waste is decreased significantly since color is achieved in only a few sheets.
      Offset – Crestline® Altra Series Dampner

      Offset – Crestline® Altra Series Dampner


      Altra also uses an existing water form position for easier maintenance and features a double-nip oscillation.  The oscillator is located between the form and intermediate rollers for improved milling of ink and water.  The Crestline Altra Series Dampner installs without changing the ink train configuration and adaptable to any circulator.  Available for A.B. Dick: 9985, 9995, Hamada: C248, C252, Heidelberg: GTO46, GTO52, Itek: 3985, Ryobi: 3302M and 3302H, 3304H.
  • Offset – Crestline® Continuous Feed Dampener (link)
    • The Crestline® continuous feed dampener is designed to provide an uninterrupted flow of fountain solution to the plate, delivering instant ink and water balance. Color is achieved in only a few sheets. The Crestline runs without alcohol for minimal maintenance and does not allow moisture to migrate back into the ink fountain.  Crestline dampeners are easy to use and include single lever control, gear driven operation, ball bearing construction and an easily removable water tray. Installation can be done in just a few hours, without altering the press, and any operator can be trained to use the Crestline Dampener in less than an hour. The benefits of increased productivity and profits start the same day the dampener is installed.  Available for A.B. Dick: 375, 8800 series, 8900, 9810-9850, 9870, 9900, A.M. Multigraphics: 1250, 1360, 1450, 1650, 1850, 1860, 1960, Hamada: E47, E47S, SU47, 500CDA, 600,665, 700, 775, Itek: 950, 960, 975, 985, Ryobi: 2700, 2800, 3200, 3200E, 3200MCD, 500N, Townsend: T-51(Stationary and Swing away), A.B. Dick 9800 (Anniversary Edition), 8800, 9800.

About Accel Graphic Systems aka Pamarco Global Graphics:
From its original incorporation in 1946 to its current structure today, Pamarco Global Graphics has led the way in the field of print services technology over the last 65 years. The original mechanical Anilox rolls were built and developed in those early years, and the Evenflo™ became the standard for Flexographic printing. In the early 70’s the Laser Engraved Ceramic Anilox roll was developed in the Warrington facility in Europe, and over the years the Fiberlyte™ carbon fiber roll and the Wyko™ inferometer cell measurement device all became leaders in Anilox technology. The new EFlo™ is setting new standards in quality printing. This leadership has further been established by being the only company to have 5 of its employees inducted to the FTA Hall of Fame. The same leadership has been demonstrated in the Offset industry with award winning and innovative technologies in both press accessories and roller manufacture. This includes the Tempest™ Hot Air drying system which won the GATF award in 1991, and more recently the Sentinel™ ink management system, the ground breaking product which introduced cartridge based ink dispensing to the market. Pamarco’s Syn-Tac® and Diamond brand rollers have led the way in rubber roller innovation, and have been solving printing problems for three and a half decades. Pamarco were the first to bring dual body rollers to the market, and water rollers such as the Spiral have been instrumental for printers in the post isopropyl alcohol era of offset printing. Pamarco also developed the original combination product, UV Blue, which is the market leader for those printers who choose to run UV and conventional inks on the same press. Other firsts include being the first roller manufacturer to utilize non contact laser technology, to ensure quality taper free concentric rollers, and the first company to create an off the shelf product for the sheet fed and web markets in the 80s.